 |
|
Product Details:
Payment & Shipping Terms:
|
| Base Material/ Dielectric: | FR - 4 | Layer: | 2 Layers |
|---|---|---|---|
| Surface Treatment: | OSP | Copper Thickness: | 1 OZ |
| Solder Mask: | Green | Min. Aperture: | 0.25 Mm |
| Line Width/Spacing: | 0.1 / 0.1 Mm | Size: | 105 *100 Mm |
| Board Thickness: | 1.6mm | ||
| High Light: | through hole pcb,copper pcb board |
||
Professional TV Parts Circuit Board PCB from Shenzhen
The Professional TV Parts Circuit Board PCB is soldered with green, which board thickness is only 1.6mm. And the Professional TV Parts Circuit Board PCB is dealt with OSP as the surface treatment.
How to get quick quotation?
| Step 1 Please send us Gerber file with these format: .CAD / .Gerber / .PCB / .DXP / .P-CAD, etc | ||||||||||||||||||||
| Step 2 Also please provide us the below details for quick quotation: | ||||||||||||||||||||
Board material: Fr - 4 / CEM - 1 / CEM - 3 / 22F / Fr - 1 / others | ||||||||||||||||||||
| Material brand: SY / KB / Rogers (optional) | ||||||||||||||||||||
| Material Specification:High Tg / copper based / aluminum based or others (optional) | ||||||||||||||||||||
| Board thickness: 0.1 - 6.0 mm | ||||||||||||||||||||
| Copper thickness: 0.05 Oz - 8 Oz ( 17 um - 288 um ) | ||||||||||||||||||||
| Surface Treatment: OSP / ENIG / HASL / Lead Free HASL / Immersion Tin / Immersion Sin | ||||||||||||||||||||
| Color of solder mask and silk print: Green / red / blue / black / white / yellow ,etc | ||||||||||||||||||||
| Board size and quantity | ||||||||||||||||||||
| ||||||||||||||||||||
SAMPLE: | ||||||||||||||||||||
| ||||||||||||||||||||
-- What LEFANG's vision is to Make Our Customer's Products Better, so we try our best to fulfill the quality control
system andenvironmental management system. Our approved certification are as below:
| ISO9001:2008 | ISO14001:2004 |
| ISO/TS16949:2009 | OHSAS18000 |
| UL | RoHS |
| QC080000 | CQC |
Now send us your inquiry, and you will be replied within 8 hours!
Little knowledge - How to reduce PCB cost
1. Improve the utilization ratio of the PCB substrate material. It is better to over 85 percents;
2. To make a bigger hole size of PCBs, which is no less than 0.3mm if possible and reduce the total amount of drilling holes;
3. The minimum trace width and space of PCBs is better no less than 4 mil, or the scrap rate will be increased 3 to 5 percents;
4. Reduce the board thickness of the printed circuit boards;
5. Enhance the universality of the main products.
Contact Person: cyan hong
