Payment & Shipping Terms:
|Base Material/ Dielectric:||FR - 4||Layer:||6 Layers|
|Surface Treatment:||ENIG||Copper Thickness:||1 OZ|
|Solder Mask:||Blue||Min. Aperture:||0.2 Mm|
|Line Width/Spacing:||0.1 / 0.1mm||Board Thickness:||1.6 Mm|
custom made pcb boards,
main pcb board
OEM Printed Circuit Board PCB Manufacturer for Consumer Electronics
We are OEM Printed Circuit Board PCB Manufacturer. The PCB board is made with FR4 raw material with 1.6 mm board thickness. The PCB with blue solder mask and ENIG surface treatment.
How to get quick quotation?
|Step 1 Please send us Gerber file with these format: .CAD / .Gerber / .PCB / .DXP / .P-CAD, etc|
|Step 2 Also please provide us the below details for quick quotation:|
Board material: Fr - 4 / CEM - 1 / CEM - 3 / 22F / Fr - 1 / others
|Material brand: SY / KB / Rogers (optional)|
|Material Specification:High Tg / copper based / aluminum based or others (optional)|
|Board thickness: 0.1 - 6.0 mm|
|Copper thickness: 0.05 Oz - 8 Oz ( 17 um - 288 um )|
|Surface Treatment: OSP / ENIG / HASL / Lead Free HASL / Immersion Tin / Immersion Sin|
|Color of solder mask and silk print: Green / red / blue / black / white / yellow ,etc|
|Board size and quantity|
|AOI (Automated Optical Inspection)||Impedance control|
|Automatic short-circuit testing||Metallographic microscope|
|RoHS detector||Fly probe/ fixture mold|
|Dielectric tester||Visual inspection|
Now send us your inquiry, and you will be replied within 8 hours!
How to reduce PCB cost
1. Improve the utilization ratio of the PCB substrate material. It is better to over 85 percents;
2. To make a bigger hole size of PCBs, which is no less than 0.3mm if possible and reduce the total amount of drilling holes;
3. The minimum trace width and space of PCBs is better no less than 4 mil, or the scrap rate will be increased 3 to 5 percents;
4. Reduce the board thickness of the printed circuit boards;
5. Enhance the universality of the main products.
Contact Person: cyan hong